Close
Shipping schedules Marinas

Piling at the Waitohi Ferry Redevelopment Project

Construction on Port Marlborough’s Transition Berth for the Waitohi Ferry Redevelopment Project is underway, and is on track to be operational by March 2027 to provide temporary infrastructure for the existing Interislander ferries while the permanent wharf is built. This will ensure Interislander ferry services are maintained while the team from HEB Construction are building Picton’s newest wharf, set to become the new permanent Interislander Berth.

The Transition Berth is supported by 57 piles, forming the foundations for the dolphin structures and landside bridge that will connect the current ferries to shore. Measuring up to 32 metres long, these piles provide the strength needed to support new ferry infrastructure in an active marine environment. The piles are located across the Inner and Outer Dolphins, as well as the landside bridge and linkspan structure that will connect existing Interislander vessels to shore.

What are dolphin structures?

The piles will form several structures around the new berths, including marine structures known as dolphins. A dolphin is a group of piles installed in the water to help vessels berth, moor or safely navigate around a structure. There are three key types of dolphins:

Concept Illustarion

Outer Dolphin

Helps guide ferries safely into position when arriving at the berth.

Spring Line Dolphin

Secures mooring lines that prevent the ferry from moving forward or backward.

Long Dolphin

Provides an additional mooring point to help keep the ferry securely alongside the berth.

Did you know?
Despite the name, dolphins are not named after the sea mammal. The term is thought to come from the Dutch word dukdalf, an old maritime name for a cluster of timber piles used to moor ships in busy ports. Today, dolphins serve the same basic purpose, helping guide, berth and secure vessels around the world.

While piling is one of the most visible construction activities on site, it is also one of the most carefully managed. A wide range of controls are in place to reduce impacts on the harbour environment, marine life and the local community. These include sediment controls such as silt curtains where required, rock bag protection to help prevent shoreline erosion, stormwater protection, spill kits and containment equipment.

The team also undertakes daily kororā monitoring to ensure any little blue penguins along the shoreline are identified and protected before work begins. Trained Marine Mammal Observers are positioned at key vantage points around the harbour. If marine mammals are observed within designated exclusion zones, piling activities are paused until they are safe to resume.

To further reduce potential effects on marine life, piling uses a range of noise-reduction measures, including a bubble curtain and a cushion fitted to the impact hammer. A bubble curtain releases a continuous ring of air bubbles around the pile, helping to reduce the amount of sound travelling through the water. Each piling shift also begins with a gradual “soft start”, allowing marine mammals nearby to detect the activity and move safely away before full-scale piling begins.

 

HEB’s jack-up barge

Jack-up barge

floating piling gate

the bespoke floating piling gate provides a safe working platform for crews while helping keep piles precisely positioned as they are installed into the seabed.

 

Preparing for piling

Although piling is now progressing smoothly, reaching this point required extensive preparation. The team established the work site, put clear processes in place and set up the specialist equipment needed for the job. This includes HEB’s jack-up barge (pictured above left), which lifts above the water on four steel legs to provide a stable platform for piling, and a custom-made floating piling gate (pictured above right) fabricated in Marlborough, which helps crews position the piles safely and accurately.

Working in a busy marine environment brings its own challenges. Noise from multiple activities happening at once, limited working space and the need to maintain clear communication across the site all require careful management. The exclusive marine construction zone allows work vessels to operate safely while keeping construction activities clearly separated from the public.

Did you know? The jack-up barge arrived in Picton in 22 truckloads from Auckland and took four days to assemble 19 separate pontoons. Measuring 17m x 24m, it can operate in conditions that would make a floating barge unsuitable. The largest components were the four 36m, 36t “spud” legs, transported by HEB’s own heavy haulage team.

 

How the piling works

Multiple work fronts often operate simultaneously within the area. Clear communication, careful planning and strict safety procedures help ensure every activity is carried out safely.

Installing the piles is a carefully managed process. First, the crane lifts each pile casing and carefully positions it within the piling gate, ready for installation. The team then uses a vibro hammer, which applies high-frequency vibrations to guide the pile into the seabed. This reduces resistance and the amount of impact hammering required later. Once the pile reaches harder ground, an impact hammer drives it to its diving nearby may occasionally hear or feel the underwater sound generated during this work final depth. People swimming, snorkelling or diving nearby may occasionally hear or feel the underwater sound generated during this work.

Did you know? That the boom (the long arm that extends from the crane) of the largest cranes on site are 63m metres long, that is about as tall as a 20-storey building, or seven giraffes standing on top of each other!

Accuracy is a key part of the piling process. Surveyors closely monitor each pile to make sure it is installed in the correct location and to the required level.


 

The Team Behind the Piling Works at Waitohi

A skilled piling crew is helping deliver the marine construction for the Waitohi Picton Ferry Redevelopment Project. Meet three members of the team and learn more about the specialist equipment, careful planning and environmental controls behind the work.

Meet Lima 

For Piling Supervisor Lima Tofa, the Waitohi Picton Ferry Redevelopment brings together everything he enjoys about working in construction.

Originally from Wellington, Lima joined HEB around three months ago after relocating to Picton for the project. He began his career in landside construction before moving into marine works, a field he prefers for its unique challenges and ever-changing environment. Outside of work, Lima is looking forward to exploring more of the South Island through camping and other outdoor adventures. He is also keen to make the most of living in Picton by spending plenty of time fishing and diving.

“The best thing about the job is everything, really – the crew, the team, being here in Waitohi and seeing the piles go in safely,” says Lima.

With spring underway and summer on the horizon, Lima is enjoying life in Picton and is proud to be part of a team helping deliver an important piece of infrastructure for the region.

“It’s great to see everything coming together.”

 

Meet Maui

Originally from Pauanui in the Coromandel, Maui joined HEB earlier this year after working in welding in Auckland. He is now part of Lima Tofa’s piling crew.

For Maui, the best part of the job is simple: “getting the piles in the ground.”

While pile splicing can be one of the more challenging aspects of the work, he enjoys being part of a great crew.

When he is not on site, Maui likes getting out on the golf course, often playing at Picton and Rarangi. He is also enjoying life in Picton.

“I like the water and the quietness of Picton”

 

Meet Conway

Originally from Auckland, Conway spent 10 years in Melbourne and worked as a Qantas flight attendant for 16 years. After being stranded in New Zealand during COVID-19, he moved into construction and has now been with HEB for six years. Conway joined the project nine months ago and works on the jack-up barge. He enjoys operating the large equipment, working with the crew and exploring the South Island in his spare time. You may also see him around Picton in his distinctive old red fire truck.

“I enjoy the big gear and working with a good crew.”

 

 

Want to know more?

  • Find out more about the overall Cook Strait Ferry Replacement Programme at www.ferryholdings.co.nz
  • For media enquiries or general project information, please contact [email protected]
  • For enquiries about construction activities or site works, please contact HEB Construction [email protected]